High pressure steam peeling machine using pressure 0.5mpa-0.8mpa saturated steam,
instantaneous aging of potato processing principle of the skin.
The machine uses fully automated PLC control, two gas control valves used in series to control the high-pressure steam intake and exhaust, when the high-pressure steam peeling machine work, first close the intake control valve, steam skin canopy door in the cylinder Under the feed position, the top of the hopper equipped with a gravity sensor, set the feed rate of raw materials, batch feed.
After completion of the feed, close the exhaust valve, turn off the steaming can lid door, open the intake valve, and steaming cans rotation, the corresponding number of revolutions, (at this time, the rotation is the number of steaming time) Stop in the nesting state of the position, close the intake valve, start the exhaust valve, steaming cans of high pressure steam net, the steam skin cans in the cylinder under the action of opening, unloading.
At the same time supporting the machine to enhance the work of the screw conveyor material, into the next process. At the same time, the steaming tank is rotated to the position to be fed into the next working cycle (the volume of the steaming can is determined according to the different production lines).
| 1 |
Steam-peel machine |
Φ850×1450mm |
3kW |
S304 |
3-5T per hour |
Product Introduction
Machine Introduction
The device absorbs the experience of many customers and digestion and absorption of Italy advanced equipment,well-developed on the basis of the original imported equipment,is a highly efficient physics steam peeling device,has the features of refined rate, stable performance, long life, low noise, easy operation and maintenance, etc. Can greatly reduce production costs,improve the economic efficiency of enterprises.
Using Scope
This steam peeling machine applies to peeling potatoes, sweet potatoes, carrots and other tubers materials,skin little loss, easy to operate, wide range of uses. Using high-pressure steam for rapid heating, instantaneous release explosion skin. With high peeling rate, low loss, large capacity, peeled material surface is smooth, no pollution and other advantages.
Main parts:
1. Weighing hopper 2. Frame 3. Pressure tank 4. Aggregate elevators
5.Pneumatic components 6. Steam Components 7. Discharge tank
8.Electrical box
Working Principle
Plate hoist the bulk material into the weight hopper,weighing instruments according to process requirements can be arbitrarily set 60-250kg weighing range,weighing sensor control silo stop or start feeding elevators,starting pressure tank gear reducer and touchscreen set 3-8r/min arbitrarily,when pressure tank cylinder door by sensors positioned upward cylinder doors and feed hopper door opens automatically,when weighing hopper is zero weight, close the hopper door to start the feed elevators,while closing pressure tank into the discharge cylinder door,open the steam valve,close the steam exhaust valve,starting pressure tank rotation,when the touch screen set rotation time,by the sensor is positioned into the discharge cylinder door,close the steam valve,open the steam exhaust valve,opened the cylinder door discharge to the next out-feed conveyor feed hopper,transported to the next process hair brush Paper Machine.
Machine Features
1, Use for potatoes, taro, ginger,sweet potato,carrot,etc. peeling.
2, Automatic weighing by electronic scale,Pneumatic door open pan feeding.
3. Discharge: pneumatic transport emissions until next door open pan in the elevator.
4. Has a heat recovery steam emission device.
5. PLC and touch screen control set.
6. With low steam consumption and high efficiency, high peeling rate, low material loss rate, etc
7. Peeling rate more than 93%.
Technical parameters
Model: GY1
Production capacity: 1t / h
Peel loss rate: ≤8%
Pressure tank volume: 0.3m3
per batch capacity: 20 ~ 40kg
Steam pressure: 1.2 ~ 1.6Mpa
Steam consumption: 200 ~ 500kg / h
Host Power: 2.0KW
Hoist Power: 0.75KW (mechanical speed)
Batch Time: 30-60S (depending on steam pressure)
Pressure tank speed: 3-8r / min frequency control (depending on per batch material's weight)
Required compressed air: Pressure ≤0.7Mpa, consumption 0.1m3 / min (by user)
Discharge tank volume: 1 m3
Overall dimensions: 1200*1600*1500mm
Note: This equipment need to connect feeding hoist and brush washing machine.
Audited Supplier 
){kind=link}