Pepper stem removing machine ( pepper/chili stem remover)
Widely used for all kinds of fresh and dehydrated pepper/chili stem cutting, it consists of multiple feeding hoppers, 1-4 cutting cylinder, one pepper/chili outlet and one stem outlet.
Plug in power, turn on the machine,manually feed in the pepper/chili, easy to operate.
Material |
External : carbon steel
Internal : SUS201 |
Working voltage |
220V |
Power |
1.5kw |
Capacity |
120~150 kg/h |
Speed |
1400rpm |
Effectiveness |
≥95% |
Weight |
450kg |
Dimension |
2810*1100*1400mm |
Introduction of chili stem cutting machine
1.Chilli stem removing machine is used to remove chilli stem.
2.Just turn on the power and put the raw chili into feed port, then you can get chili without stem from discharging port. After all the materials in the drum go out, switch off the power.
3.High clean rate: 85-95% above, based on different types of chili such as Yidu, ChaoTian, Yunnan, millet chilli, Jinta, America chili and so on, even fresh chili, you should choose right model to get perfect effect.
4.Output: Dry chili 120kg/h above. Wet chili 180kg/h above.
Working Process of chili stem cutting machine
Just switch on the power and put the raw chili into feed port and then you can get chili without stem from discharging port. When all the raw material in machine drum going out, the work is well done, then switch off the power. That is all, very simple but practical.